Aquabot Pool Rover S2-40 - Frequently Asked Questions
The Aquabot Pool Rover S2-40 is a robotic pool cleaner that is made by Aquabot. Learn answers to common questions about this product below!
The Aquabot Pool Rover S2-40 is a robotic pool cleaner that comes from the reliable company Aqua Products. Made in the USA and with a great reputation, there are few cleaners that compare with the Aquabot Pool Rover S2-40 for both above ground pools and in-ground pools. Robotic cleaners were a market that was once very expensive and out of budget for most pool owners but have now become much more reasonable in price. Below are some troubleshooting tips and frequently asked questions.
Aquabot Pool Rover S2-40 Tips
What do I do if my cleaner moves slowly or doesn’t seem to be vacuuming?
This is the most common question. The solution is to make sure that the filter bag is thoroughly clean. Also check to see that the suction ports are not clogged or blocked on the Aquabot Pool Rover S2-40.
What does it mean when all LED lights are blinking on the power supply?
- Check to see if the unit is out of water.
- Check to see if the filter bag is stuck in the screen.
- Check to see if the propellers are stuck.
- To restart, press the power button once.
- Cleaning program will resume from where it left off.
The floating cable is coiled up, how can I prevent this?
Change the axle set-up. Unit is most likely turning too sharply. Use the E-Z Swivel to straighten out the cable.
My unit is not sucking up debris, what is the problem?
- Check to see that you’ve properly set-up the unit and power supply.
- Check to see if the propellers are stuck.
- Adjust the suction ports on the bottom of the unit.
Unit is stuck in the middle of the pool but the unit still pumps out water.
- Check to see that there is nothing obstructing the Aquabot Pool Rover S2-40 cleaner or that the cleaner is not stuck on any loose objects in the pool.
- The suction ports are far too low to the pool bottom.
My cleaner looks like it is moving in the same area of the pool and does not clean other areas.
- Change the axle set up by adjusting the pin configuration. This will help move the cleaner in a different direction to cleaner.
- Check axle and turning pin configurations.
My cleaners do not cover the entire pool, how can I fix this?
- Check to see that the Aquabot Pool Rover S2-40 filter bag is thoroughly clean.
- Adjust the timing cycle on the power supply.
- Check to see that the axle area is not clogged.
- Check axle and turning pin configurations.
Additional Safety Tips from Our Pool Experts
Do not turn the Power Supply on, unless the pool cleaner is in the water.
Do not operate your machine while people swim in the pool.
The Power Supply must be placed at least 12 feet / 4 meters from the pool’s edge at all times! See diagram below.
To prevent possible electric shock hazard this unit must be connected to an RCD (Residual Current Device – more commonly known as a GFCI) with a related residual operating current not exceeding 30mA.
Before performing any troubleshooting maintenance procedures, your Cleaner should be disconnected from the Power Supply (transformer) and the Power Supply should be unplugged from the electrical outlet to prevent the possibility of personal injury or damage to your Cleaner!
Robotic Pool Cleaners
We carry a wide range of cleaners - from your basic swimming pool vacuum to the most advanced robotic cleaners in the industry!
Shop Products
About The Pool Factory
America’s Above Ground Pool Experts – is the best place to find everything you need to make owning a swimming pool or spa fun and easy, at the best prices today. With a combined 50+ years of experience The Pool Factory employs a highly trained staff of above ground and semi inground pool specialists. The Pool Factory can provide unique solutions for all pool supplies and swimming pool needs.
