How to Clean the Cell in Your Solaxx Saltron Retro Saltwater Generator

The salt cell should be inspected every 3 months to ensure proper maintenance of the device. These instructions can be used for both the Solaxx Saltron Retro and Retro XL.

Step 1

Unplug the Solaxx Saltwater system from the GFCI socket.

Solaxx Saltron Retro Saltwater Chlorine Generator SALRET20A

Solaxx Saltron Retro XL Saltwater Chlorine Generator SALRET20A-XL

Step 2

Remove the cover of the cell housing so that the cell is exposed. Push the tab with your finger and remove the cell. Inspect the cell for scaling (white, sugar-like) deposit. If scaling exists, the cell should be cleaned.

Step 3

To clean the cell, a bucket or a large cup should be used. The bucket should be filled with 80% water and 20% muriatic acid. Never add water to acid, only acid to water.

Replacement Salt Cell

Step 4

Place the entire cell into the bucket for 20 minutes.

Step 5

Using Acid-Resistant gloves remove the cell (avoid touching the acid water) and dump the water from the bucket into the pool. If the scaling remains, repeat the process. Never use any tools to clean the scale deposit. This will damage the plates and result in immediate loss of warranty. After the scale is removed, rinse the cell with fresh water.

Step 6

To re-install, replace cell into housing. Replace cover onto base. Replace the Solaxx Saltron Retro cell housing onto the hanger on the pool edge using the snapping mechanism.

About The Pool Factory

America’s Above Ground Pool Experts – is the best place to find everything you need to make owning a swimming pool or spa fun and easy, at the best prices today. With a combined 50+ years of experience The Pool Factory employs a highly trained staff of above ground and semi inground pool specialists. The Pool Factory can provide unique solutions for all pool supplies and swimming pool needs.