How To Identify Your
BOREAL Round Pool Components

Learn how to identify the different components of your Boreal Round Pool.

Boreal Round Pool Model

Parts Breakdown

Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Boreal Round Swimming Pool Model.

Top Ledge – Reference A

Top Ledge

The Top Ledges (sometimes referred to as Top Rails) are the resin top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 7″ wide and are located at the very top of your pool.

Material: Steel

Ref #	Description	Part #	Length	12'	15'	18'	21'
A	Top Ledge	771006GS	45"	10
A	Top Ledge	771005GS	46 3/4"		12
A	Top Ledge	771002GS	55 1/8"			12	14

Ref #	Description	Part #	Length	24'	27'	30'	33'
A	Top Ledge	771002GS	55 1/8"	16	18	20	22

Top Tracks – Reference K

Top Track

The Top Track Stabilizers are the tracks/rails that stabilize the top of the pool wall.

Material: Coated Steel

Ref #	Description	Part #	Length	12'	15'	18'	21'
K	Top Track	673109	44-3/4"	10
		673101	46"		12
		673102	55-1/2"			12
		673103	55-1/2"				14

Ref #	Description	Part #	Length	24'	27'	30'	33'
K	Top Track	673104	55-1/2"	16
		673105	55-1/2"		18	20	22

Bottom Tracks – Reference G

Bottom Track

The Bottom Tracks insert into the Upright Boots.

Material: Coated Steel

Ref #	Description	Part #	Length	12'	15'	18'	21'
G	Bottom Track	610138	44-3/4"	10
		610139	46"		12
		610122	55-1/2"			12
		610123	55-1/2"				14

Ref #	Description	Part #	Length	24'	27'	30'	33'
G	Bottom Track	610124	55-1/2"	16
		610125	55-1/2"		18	20	22

Top Caps – Reference F

Top Cap

The Top Caps go over the Top Joiner Plates. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.

Ref #	Description	Part #	12'	15'	18'	21'
F	Top Cap	7774GFRB	10	12	12	14

Ref #	Description	Part #	24'	27'	30'	33'
F	Top Cap	7774GFRB	16	18	20	22

Cap Extension Collar – Reference H

boreal-cap-extension-curved-side-650x650-small_1125x1125.webp__PID:830bf83a-df09-49ae-b423-e6e77c0f0e46

Cap Extension Collar Curved Side

The Upright Collars are installed at the top of every upright on the outside of the swimming pool.

Ref #	Description	Part #	12'	15'	18'	21'
H	Cap Extension Collar	7776GFR	10	12	12	14

Ref #	Description	Part #	24'	27'	30'	33'
H	Cap Extension Collar	7776GFR	16	18	20	22

Top Connector Joiner Plate – Reference E

boreal-top-joiner-plate-650x650-small_1125x1125.webp__PID:8450c438-971f-4ddf-ac1c-7592dda17e5d

Top Connector Joiner Plate

The Top Connector Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Connectors Joiner Plates.

Ref #	Description	Part #	12'	15'	18'	21'
E	Top Connector Joiner Plate	568UBC	10	12	12	14

Ref #	Description	Part #	24'	27'	30'	33'
E	Top Connector Joiner Plate	568UBC	16	18	20	22

Upright Post – Reference D

boreal-upright-650x650-small_1125x1125.webp__PID:b1bbfdca-1365-4751-bd55-0b51a5ef2113

Upight Post for Curved Side

The Upright Posts are the vertical posts on the outside of your swimming pool wall. Each upright post on the curved side of the swimming pool clips into the Upright Boots.

Ref #	Description	Part #	12'	15'	18'	21'
D	Upight Post	7720GF52R4	10	12	12	14

Ref #	Description	Part #	24'	27'	30'	33'
D	Upight Post	7720GF52R4	16	18	20	22

Upright Boot Bottom Connector – Reference C

boreal-bottom-boot-650x650-small_1125x1125.webp__PID:a481f1a9-c0c3-4698-bd61-dc8bf1c5d77c

Upright Boot Bottom Connector

The Upright Boot Bottom Connectors connect your Bottom Tracks together on the curved sides of an oval swimming pool. Your curved side upright posts will also clip into the Upright Boot Bottom Connector.

Ref #	Description	Part #	12'	15'	18'	21'
C	Upright Boot Bottom Connector	7FCCOMBOGFRM	10	12	12	14

Ref #	Description	Part #	24'	27'	30'	33'
C	Upright Boot Bottom Connector	7FCCOMBOGFRM	16	18	20	22

Coping Strips – Reference DD

Coping Strips

IMG_5997-275x275.jpg__PID:bc7bd850-ee67-48fd-9303-fa875b77af32

Overlap Liner Installation Using Coping Strips

An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If using a Uni-Bead or J-Hook liner you can discard the coping strips.