How To Identify Your
Hampton Round Pool Components
Learn how to identify the different components of your Hampton Round Pool.
Hampton Round Pool Model
Parts Breakdown
Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Hampton Round Swimming Pool Model.
Top Ledge – Reference A
Top Ledge
The Top Ledges (sometimes referred to as Top Rails) are the resin top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 9″ wide and are located at the very top of your pool.
Material: Resin
| Ref # | Description | Part # | Length | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|---|
| A | Top Ledge | 9RL108MR | 45-1/4" | 10 | |||
| Top Ledge | 9RL107MR | 55-7/8" | 12 | 12 | 14 |
| Ref # | Description | Part # | Length | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|
| A | Top Ledge | 9RL107MR | 55-7/8" | 16 | 18 | 20 | 22 |
Top/Bottom Tracks – Reference G
Top/Bottom Track
The Top and Bottom Tracks for the Hampton Round pool are the same exact part.
The Top Tracks stabilize the top of the pool wall.
The Bottom Tracks insert into the Upright Boots.
Material: Coated Steel
| Ref # | Description | Part # | Length | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|---|
| G | Top/Bottom Track | 610127 | 44-3/4" | 20 | |||
| 610121 | 56" | 24 | |||||
| 610122 | 55-1/2" | 24 | |||||
| 610123 | 55-1/2" | 28 |
| Ref # | Description | Part # | Length | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|
| G | Top/Bottom Track | 610124 | 55-1/2" | 32 | |||
| 610125 | 55-1/2" | 36 | 40 | 44 |
Top Caps – Reference F
Top Cap
The Top Caps go over the Top Joiner Plates. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| F | Top Cap | 9CARMR | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| F | Top Cap | 9CARMR | 16 | 18 | 20 | 22 |
Cap Extension Collar – Reference H
Cap Extension Collar Curved Side
The Upright Collars are installed at the top of every upright on the outside of the swimming pool.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| F | Cap Extension Collar | 9EXRMR | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| F | Cap Extension Collar | 9EXRMR | 16 | 18 | 20 | 22 |
Top Connector Joiner Plate – Reference E
Top Connector Joiner Plate for Uprights
The Top Connector Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Connectors Joiner Plates.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| E | Top Connector Joiner Plate | 21001 | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| E | Top Connector Joiner Plate | 21001 | 16 | 18 | 20 | 22 |
Upright Post – Reference D
Upight Post for Curved Side
The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post clips into the Upright Boots.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| D | Upright Post | 6001MP52R4 | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| D | Upright Post | 6001MP52R4 | 16 | 18 | 20 | 22 |
Upright Boot Bottom Connector – Reference C
Upright Boot Bottom Connector
The Upright Boot Bottom Connectors connect your Bottom Tracks together. Your Upright Posts will also clip into the Upright Boot Bottom Connector.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| C | Upright Boot Bottom Connector | 9FCCOMBOM | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| C | Upright Boot Bottom Connector | 9FCCOMBOM | 16 | 18 | 20 | 22 |
Coping Strips – Reference DD
Coping Strips
Overlap Liner Installation Using Coping Strips
An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If using a Uni-Bead or J-Hook liner you can discard the coping strips.
Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Hampton Round Swimming Pool.
HAMPTON ROUND INSTALLATION & SAFETY INSTRUCTIONSHampton Replacement Parts
Need a replacement part? Shop our selection of Hampton Pool Parts by clicking on the tab below:
Shop Products
