How To Identify
Your Intrepid Oval Pool Components

Learn how to identify the different components of your Intrepid Oval Pool.

Intrepid Oval Pool Model

Parts Breakdown

Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Intrepid Oval Swimming Pool Model.

Top Ledge – Reference #6

Top Ledge

The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 8″ wide and are located at the very top of your pool.

Material: Extruded Aluminum

Ref #	Description	Part #	Length	12'x17'	12'x20'	12'x24'	15'x24'
6	Top Ledge	29801	40-3/32"	12	10	10
		29802	51-5/32"				10
		29810	47-5/16"				4
		29805	41-1/4"	4	6	8	2

Ref #	Description	Part #	Length	15'x26'	15'x30'	18'x33'	18'x40'
6	Top Ledge	29802	51-5/32"	10	10
		29803	51-29/32"			12	12
		29805	41-1/4"	8	10	10	14

Top Track/ Inner Stabilizer – Reference #1

Top Track

The Top Track Stabilizers are the aluminum tracks that go over the Beaded Liner Track and stabilizes the top of the pool wall.

Material: Extruded Aluminum

Ref #	Description	Part #	Length	12'x17'	12'x20'	12'x24'	15'x24'
1	Top Track	38053	32-7/8"	8	10	10
		38055	43-7/8"				10
		38060	36-1/2"		4	4
		38059	35-1/4"	4
		38061	39-1/8"				4
		38063	37-1/2"	2	2	4	2

Ref #	Description	Part #	Length	15'x26'	15'x30'	18'x33'	18'x40'
1	Top Track	38055	43-7/8"	10	10
		38060	36-1/2"	4	4	4	4
		38063	37-1/2"	4	6	6	10
		38062	45"			12	12

Top Caps – Reference #9 & #10

Top Cover/Outer Cap

intrepid-top-inner-side-cap-outside-650x650-small-dm_1125x1125.webp__PID:7b301f4d-7f73-497b-89de-4d305b0083a1

Top Cover/Inner Cap

The Top Caps consists of (2) parts. There is an Outer Cap Top Cover which is closer to the outside of the pool. The Inner Cap Top Cover is installed on the inside of the swimming pool closer to the water. The Top Covers cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.

Usually for oval shaped swimming pools there are (2) types of Outer Cap Top Covers. There are Outer Caps for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the cap must fit onto the upright.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
9	Top Cover/Inner Cap	16300	14	16	18	16
10	Top Cover/Outer Cap - Straight Side	16302	4	4	6	4
10	Top Cover/Outer Cap - Curved Side	16301	10	12	12	12

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
9	Top Cover/Inner Cap	16300	18	20	22	26
10	Top Cover/Outer Cap - Straight Side	16302	6	8	8	12
10	Top Cover/Outer Cap - Curved Side	16301	12	12	14	14

Top Joiner Plates – Reference #3 & #13

top-joiner-plate-round-and-oval-intrepid-650x650-small_1125x1125.jpg__PID:fca49465-8f40-4f9c-b1db-a33c10a0f194

Curved Side Upright

wilbar-straight-side-joiner-top-plate-650x650-small-dm_1125x1125.webp__PID:a49a25ac-f0c2-4b99-8dcf-db6c39d1f96e

Straight Side Upright

The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.

For oval shaped swimming pools there are (2) types of Top Joiner Plates. There are Top Joiner Plates for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the Top Joiner plate must fit onto the top of the upright.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
3	Top Joiner Plate Curved Side	16298	10	12	12	12
13	Top Joiner Plate Straight Side	10136	4	4	6	4

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
3	Top Joiner Plate Curved Side	16298	12	12	14	14
13	Top Joiner Plate Straight Side	10136	6	8	8	12

Uprights – Reference #5 & #14

intrepid-upright-post_3_1125x1125.webp__PID:c7f65dc8-65e0-4146-922b-e6475e5e2db4

Curved Side Upright

Straight Side Upright

The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post on the curved side of the swimming pool inserts into the bottom resin boots and connects to the top joiner plate with screws.

For oval shaped swimming pools there are (2) types of Uprights. There are Uprights for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the Top Joiner plate must fit onto the top of the upright.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
5	Curved Side Uprights	29799	10	12	12	12
14	Straight Side Uprights	26340	4	4	6	4

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
5	Curved Side Uprights	29799	12	12	14	14
14	Straight Side Uprights	26340	6	8	8	12

Upright Boot – Reference #8

intrepid-upright-boot-650x650-small-dm_1125x1125.webp__PID:556a7c83-a91d-418f-b44f-b812c72d740f

Curved Side Upright

The Upright Boots connect your Bottom Tracks together on a round pool and on the curved sides of an oval swimming pool. Your curved side uprights will also clip into the Upright boots.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
8	Upright Boot	27117	10	12	12	12

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
8	Upright Boot	27117	12	12	14	14

Beaded Liner Track – Reference #7

intrepid-coping-2_1_1125x1125.webp__PID:0b3db956-79d4-4005-a65d-428938bb741d

Beaded Liner Track

Beaded Liner Track Installation

The Beaded Liner Track is installed on the top of your pool wall. Then the bead of your pool liner is inserted into the Beaded Liner Track.

Material: Resin

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
7	Beaded Liner Track	22650	14	15	16	18

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
7	Beaded Liner Track	22650	18	18	22	25

Gussets – Reference #15 & #16

intrepid-gusset-2_2_1125x1125.webp__PID:a22904cd-9812-4e8b-9473-c75b1fdab6e2

Left Side Gusset

intrepid-gusset-1_1_1125x1125.webp__PID:2904cd98-126e-4b14-b3c7-5b1fdab6e298

Right Side Gusset

The Yardmore Gussets consists of a Left side and a Right Side that are attached together at each straight side Upright.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
15	Left Side Gusset	17865	4	4	6	4
16	Right Side Gusset	17866	4	4	6	4

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
15	Left Side Gusset	17865	6	8	8	12
16	Right Side Gusset	17866	6	8	8	12

Channel Supports – Reference #18 & #19

Top Channel Support Beam for Oval Wilbar & Saltwater Series Pool Models

Upper Oval Channel

bottom-channel-support-beam-for-oval-wilbar-and-saltwater-series-pool-models.png__PID:517ea217-d3ba-4a34-95eb-e4f77733b79e

Under Ground Channel

The Upper (Top) Oval Channel and Under (Bottom) Ground Channel come together to form a tube. The Upper Oval Channel is longer than the Under Ground Channel and will extend past the Under Ground Channel towards the inside of the swimming pool.

The Gussets, Straight Side Uprights and Pressure Plates will be installed to these channels.

Ref #	Description	Part #	Length	12'x17'	12'x20'	12'x24'	15'x24'
18	Upper Oval Channel	16539	52-3/8"	4	4	6	4
19	Under Ground Channel	15933	45-9/16"	4	4	6	4

Ref #	Description	Part #	Length	15'x26'	15'x30'	18'x33'	18'x40'
18	Upper Oval Channel	16539	52-3/8"	6	8	8	12
19	Under Ground Channel	15933	45-9/16"	6	8	8	12

Pressure Plate – Reference #21

Pressure Plate

The Pressure Plates are corrugated steel plates that attach to the Upper (Top) Oval Channels and to each other.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
21	Pressure Plate	16549	4	4	6	4

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
21	Pressure Plate	16549	6	8	8	12

Straight Side Bottom Rail Connector – Reference #17

bottom-straight-side-connector-650x650-small-dm_1125x1125.webp__PID:35f2e9b7-feb6-44e1-a794-ae14fc7bced1

Straight Side Bottom Rail Connector

The Straight Side Bottom Rail Connector attaches to the Upper (Top) Oval Channel and is used to connect the straight side Bottom Tracks. The straight side Bottom Tracks will slide into the Connector on both sides.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
17	Straight Side Bottom Rail Connector	16542	4	4	6	4

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
17	Straight Side Bottom Rail Connector	16542	6	8	8	12

Bottom Track – Reference #2

Bottom Track

The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.

The Bottom Track inserts into the Upright Boots on the curved sides of the swimming pool and Straight Side Bottom Rail Connector on the straight sides.

Material: Extruded Aluminum

Ref #	Description	Part #	Length	12'x17'	12'x20'	12'x24'	15'x24'
2	Bottom Track	38063	37-1/2"	2	2	4	2
		38052	38"	12	10	10
		38054	49"				10
		38062	45"				4
		38061	39-1/8"		4	4

Ref #	Description	Part #	Length	15'x26'	15'x30'	18'x33'	18'x40'
2	Bottom Track	38063	37-1/2"	4	6	6	10
		38054	49"	10	10
		38056	50"			12	12
		38061	39-1/8"	4	4	4	4

Strap Section – Reference #22

Strap Section

The Strap Sections are connected to the Upper (Top) Oval Channels and lay flat across the width of our Oval Swimming Pools.

Ref #	Description	Part #	Length	12'x17'	12'x20'	12'x24'	15'x24'
22	Strap Section	16724	41-11/16"	4	4	6
		16725	40-11/16"				6

Ref #	Description	Part #	Length	15'x26'	15'x30'	18'x33'	18'x40'
22	Strap Section	16725	40-11/16"	9	12
		16726	52-11/16"			12	18

Oval Channel End Cap – Reference #23

Top Channel End Cap for Oval Wilbar & Saltwater Series Pool Models

Oval Channel End Cap

The Oval Channel End Cap is installed on the Upper (Top) Oval Channel and is used to prevent dirt and sand from entering the Channel.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
23	Oval Channel End Cap	22726	4	4	6	4

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
23	Oval Channel End Cap	22726	6	8	8	12

3 Hole Square Washers – Reference #20

3 Hole Square Washers

The 3 Hole Square Washers are used in the pre-assembling of the straight sides of a buttress-free oval pool.

The 3 Hole Square Washers are installed on each side of the supports when joining the Gussets, Under (Bottom) Ground Channel, Upper (Top) Oval Channel and Straight Side Uprights together.

Ref #	Description	Part #	12'x17'	12'x20'	12'x24'	15'x24'
20	3 Hole Square Washers	16663	8	8	12	8

Ref #	Description	Part #	15'x26'	15'x30'	18'x33'	18'x40'
20	3 Hole Square Washers	16663	12	16	16	24

Foam Block – Reference #24

Foam Block

The Foam Blocks are inserted into the Upper (Top) Oval Channel towards the inside of the pool. The Foam Blocks are used to prevent voids (sink holes) from forming at the location of the channels.