How To Identify
Your Saltwater 5000 Oval Pool Components

Learn how to identify the different components of your Saltwater 5000 Oval Pool.

How To Identify Your Saltwater 5000 Oval Pool Components
Saltwater 5000 Oval Pool Model

Saltwater 5000 Oval Pool Model

Parts Breakdown

Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Saltwater 5000 Oval Swimming Pool Model.

Saltwater 5000 Parts Breakdown

Top Rail – Reference #6

Saltwater 5000 Top Rail

Top Rail

The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 7″ wide and are located at the very top of your pool.

Material: Resin

Ref #DescriptionPart # Length 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
6Top Ledge 22769 40-1/8" 10


22770 51-1/16"
1010
22771 51-13/16"

12
12
22775 41-1/8" 82
1010
14
29762 47-1/4" 4

Inner Stabilizer – Reference #1

Saltwater 5000 Inner Stabilizer

Inner Stabilizer

The Inner Stabilizers (sometimes referred to as Top Track Stabilizers) are the tracks that stabilize the top of the pool wall.

Material: Resin

Ref #DescriptionPart # Length 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
1Inner Stabilizer 29934 8" 6 48
8
12
29935 33" 4
26610
29936 37" 4
4
4
4
33129 40-1/4" 10

37422 43" 4

2989056-1/16" 1212
1142851-1/16" 1010

Top Caps – Reference #9 & #10

Saltwater 5000 Top Cap/Outer Cap

Top Cap/Outer Cap

Top Cover/Inner Cap for Cameo, Heritage RTL, Signature RTL & Saltwater 5000

Top Cap/Inner Cap

The Top Caps consists of (2) parts. There is an Outer Cap Top Cap which is closer to the outside of the pool. The Inner Cap Top Cap is installed on the inside of the swimming pool closer to the water. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.

Usually for oval shaped swimming pools there are (2) types of Outer Cap Top Caps. There are Outer Caps for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the cap must fit onto the upright.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
9
Top Cover/Inner Cap 22734 181620
22
26
10Top Cover/Outer Cap - Straight Side 22733 64
8812
10Top Cover/Outer Cap - Curved Side 22732 121212
14
14

Top Plates – Reference #3 & #13

pool-supplies_replacement-parts-650x650-00009-dm_1125x1125.webp__PID:9a03d851-395e-4b56-b751-c8296cdb62e1

Top Plate Curved Side

pool-supplies_replacement-parts-650x650-00010-dm_1125x1125.webp__PID:d851395e-ab56-4751-8829-6cdb62e1a3f9

Top Plate Straight Side

The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.

For oval shaped swimming pools there are (2) types of Top Joiner Plates. There are Top Joiner Plates for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the Top Joiner plate must fit onto the top of the upright.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
3
Top Joiner Plate Curved Side 38908 121212
14
14
13Top Joiner Plate Straight Side 38911 64
8812

Uprights – Reference #5 & #14

cameo-upright-650x650-small-dm_1125x1125.webp__PID:107cbd91-a0a3-4007-b8db-917be1ea2e56

Upright

cameo-straight-side-upright_4_1125x1125.webp__PID:71107cbd-91a0-43d0-8778-db917be1ea2e

Upright Oval Straight Side

The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post on the curved side of the swimming pool inserts into the bottom upright boot and connects to the top joiner plate with screws.

For oval shaped swimming pools there are (2) types of Uprights. There are Uprights for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the Top Joiner plate must fit onto the top of the upright.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
5
Curved Side Uprights 22759 121212
14
14
14Straight Side Uprights 35738 64
8812

Boot – Reference #8

Upright Boot for Cameo, Heritage RTL, Signature RTL & Saltwater 5000 Pool Models

Boot

The Upright Boots connect your Bottom Tracks together on the curved sides of an oval swimming pool. Your curved side uprights will also clip into the Upright boots.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
8
Boots 22735 121212
14
14

Coping Strips – Reference #7

Coping For Overlap Liners - 2ft. Section

Coping Strips

Coping For Overlap Liners - 2ft. Section

Overlap Liner Installation Using Coping Strips

An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If using a Uni-Bead or J-Hook liner you can discard the coping strips.

Ref #DescriptionPart # Length 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
7Coping Strips 10296 48" 16 1919
21
24

Yardmore Gussets – Reference #15 & #16

Yardmore Gusset Left

Yardmore Gusset Left

Yardmore Gusset Right

Yardmore Gusset Right

The Yardmore Gussets consists of a Left side and a Right Side that are attached together at each straight side Upright.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
15
Left Side Gusset 35740 448
8
12
16Right Side Gusset 35741 44
8812

Channel Supports – Reference #18 & #19

Top Channel Support Beam for Oval Wilbar & Saltwater Series Pool Models

Upper Oval Channel

bottom-channel-support-beam-for-oval-wilbar-and-saltwater-series-pool-models.png__PID:517ea217-d3ba-4a34-95eb-e4f77733b79e

Under Ground Channel

The Upper (Top) Oval Channel and Under (Bottom) Ground Channel come together to form a tube. The Upper Oval Channel is longer than the Under Ground Channel and will extend past the Under Oval Channel towards the inside of the swimming pool.

The Gussets, Straight Side Uprights and Pressure Plates will be installed to these channels.

Ref #DescriptionPart # Length 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
18Upper Oval Channel 16539 52-3/8" 6 48
8
12
19Under Ground Channel 15933 45-9/16" 6
48812

Pressure Plate – Reference #21

Pressure Plate for Wilbar & Saltwater Series Oval Pool Models

Pressure Plate

The Pressure Plates are corrugated steel plates that attach to the Upper Oval Channels and to each other.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
21
Pressure Plate 16549 648
8
12

Connector Bottom Rail Straight Side – Reference #17

Bottom Straight Side Track/Rail Connector for Oval Wilbar Pool Models

Connector Bottom Rail Straight Side

The Straight Side Bottom Rail Connector attaches to the Upper (Top) Oval Channel and is used to connect the straight side Bottom Tracks. The straight side Bottom Tracks will slide into the Connector on both sides.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
17
Straight Side Bottom Rail Connector 16542 648
8
12

Bottom Rail – Reference #2

Saltwater 5000 Bottom Track

Bottom Track

The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.

The Bottom Track inserts into the Upright Boots on the curved sides of the swimming pool and Straight Side Bottom Rail Connector on the straight sides.

Material: Resin

Ref #DescriptionPart # Length 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
2Bottom Track 12311 49" 1010

12
12327 37-1/2" 4
26610
12328 39" 4
4
4
4
12330 45" 4

12331 50"
12
3899138" 1012

Strap Section – Reference #22

Strap Section

Strap Section

The Strap Sections are connected to the Upper (Top) Oval Channels and lay flat across the width of our Oval Swimming Pools.

Ref #DescriptionPart # Length 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
22Strap Section 16724 41-11/16" 6


16725 40-11/16"
612
16726 52-11/16"

12
18

Oval Channel End Cap – Reference #23

Top Channel End Cap for Oval Wilbar & Saltwater Series Pool Models

Oval Channel End Cap

The Oval Channel End Cap is installed on the Upper (Top) Oval Channel and is used to prevent dirt and sand from entering the Channel.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
23
Channel End Cap 22726 648
8
12

3 Hole Square Washers – Reference #20

3-Hole Square Washers for Oval Wilbar & Saltwater Series Pool Models - Set of 2

3 Hole Square Washers

The 3 Hole Square Washers are used in the pre-assembling of the straight sides of a buttress-free oval pool.

The 3 Hole Square Washers are installed on each side of the supports when joining the Gussets, Under (Bottom) Ground Channel, Upper (Top) Oval Channel and Straight Side Uprights together.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
20
3 Hole Square Washers 16663 12816
16
24

Foam Block – Reference #24

Foam Block for Top Channel Beam - Fits Wilbar & Saltwater Series Oval Pools

Foam Block

The Foam Blocks are inserted into the Under (Bottom) Ground Channel. Foam Blocks are used to prevent sand from entering the Under (Bottom) Ground Channel.

Ref #DescriptionPart # 12'x24' 15'x24' 15'x30' 18'x33' 18'x40'
24
Foam Block 29917 648
8
12

Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the saltwater 5000 Oval Swimming Pool.

SALTWATER 5000 OVAL INSTALLATION & SAFETY INSTRUCTIONS

Saltwater 5000 Replacement Parts

Need a replacement part? Shop our selection of Saltwater 5000 Pool Parts by clicking on the tab below:

Shop Products
Saltwater 5000 Top Cap/Outer Cap