How To Identify Your
Saltwater Aurora Round Pool Components

Learn how to identify the different components of your Saltwater Aurora Round Pool.

Saltwater Aurora Round Pool Model

Parts Breakdown

Identifying the parts of your swimming pool before the installation process will make the installation a lot easier and go more smoothly. Below you will find a breakdown of the parts that are used on our Saltwater Aurora Round Above Ground swimming pool and where they are used and installed.

Top Ledge – Index #G

Top Ledge

The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 6″ wide and are located at the very top of your pool.

Material: Injected-molded Resin

Ref #	Description	Part #	Length	15'	18'	21'	24'	27'	30'
G	Top Ledge	101483640000	56"	10	12	14	16	18	20

Top Track – Index #A

Top Track

The Top Tracks (sometimes referred to as Inner Stabilizers) are the resin tracks that hold the liner onto the pool wall.

Material: Resin

Ref #	Description	Part #	Length	15'	18'	21'	24'	27'	30'
G	Top Track	1071507160000	56"	10
		1072407160000	56"		12	14	16
		1073007160000	56"					18	20

Top Caps – Index #H & H2

Top Cap/Front Part

Top Cap/Back Part

The Top Caps consists of (2) parts. There is an Top Cap/Front Part which is closer to the outside of the pool. The Top Cap/Back Part is installed on the inside of the swimming pool closer to the water. The Top Caps cover all of the hardware where your Top Ledges screw into the Uprights.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'
H	Top Cap/Front Part	10348440000	10	12	14	16	18	20
H2	Top Cap/Back Part	10348440010	10	12	14	16	18	20

Insert Cover – Index #H1

aurora-cover-insert-cap-650x650-small_1125x1125.webp__PID:0bd518fb-f4fd-43e4-80bc-f1645cd573bb

Insert Cover

The Insert Cover clips onto the Top Cap/Front part for a decorative finish.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'
H1	Insert Cover	13057440020	10	12	14	16	18	20

Uprights – Index #F

aurora-upright-650x650-small_1125x1125.webp__PID:0088ed4b-a418-4085-8c18-ffaab12a92f7

Curved Side Upright

The Uprights are the vertical posts on the outside of your swimming pool wall. The Top Ledges will also screw into the top of the Uprights.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'
F	Upright	10248440004	10	12	14	16	18	20

Insert Cover – Index #F2

Insert Cover

The Insert Covers clip into each upright for a decorative finish.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'
F2	Insert Cover	13057440010	10	12	14	16	18	20

Bottom Joiner Plate – Index #E

saltwater-aurora-bottom-joiner-650x650-small_1125x1125.webp__PID:69aca85a-59f3-4af0-9e8b-cfaec403650a

Bottom Joiner Plate

The Bottom Joiner Plates connect your Bottom Tracks together on a round pool. Your uprights will also screw into the Bottom Joiner Plates.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'
E	Bottom Joiner Plate	11207100000	10	12	14	16	18	20

Bottom Track – Index #B

Bottom Track

The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.

The Bottom Track inserts into the Bottom Joiner Plates.

Material: Resin

Ref #	Description	Part #	Length	15'	18'	21'	24'	27'	30'
B	Bottom Track	108154700000	56"	10
		1082447000000	56"		12	14	16
		1083047000000	56"					18	20

Coping Strips – Only Included with Overlap Liners

Coping For Overlap Liners - 2ft. Section

Coping Strips

Overlap Liner Installation Using Coping Strips

An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner.