How To Identify Your Saltwater Edge Oval Pool Components

Learn how to identify the different components of your Saltwater Edge Oval Pool.

how-to-identify-saltwater-edge-oval-parts.png__PID:6eb1d759-f812-4b85-934d-47384dc65932
Saltwater Edge Oval Pool Model

Saltwater Edge Oval Pool Model

Parts Breakdown

Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Saltwater Edge Oval Swimming Pool Model.

Saltwater Edge Oval Parts Listing 1
Saltwater Edge Oval Parts Listing 2

Top Ledge – Reference A & B

Saltwater Edge Top Ledge

Top Ledge

The Top Ledges (sometimes referred to as Top Rails) are the resin top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 7″ wide and are located at the very top of your pool.

Material: Resin

Ref #DescriptionPart # Length 10'x21' 12'x18' 12'x24' 14'x20' 16'x32' 18'x33'
ATop Ledge (Curved Side)781010RGS31-5/16"12

ATop Ledge (Curved Side)781005RGS47"1010

ATop Ledge (Curved Side)781020RGS44"

12


ATop Ledge (Curved Side)781004RGS48-3/4"

12
ATop Ledge (Curved Side)781006RGS45"

14
BTop Ledge (Straight Side)781007RGS32-5/8" 84841212

Top Tracks – Reference K & L

Saltwater Titan Top Track

Top Track (Curved Side)

The Top Tracks (sometimes referred to as Inner Stabilizer Bars) are the resin tracks that stabilize the pool wall and hold the liner in place on top of the pool wall.

Material: Resin

Saltwater Titan Top Track

Top Track (Straight Side)

The Top Tracks (sometimes referred to as Inner Stabilizer Bars) are the resin tracks that stabilize the pool wall and hold the liner in place on top of the pool wall.

Material: Resin

Ref #DescriptionPart # Length 10'x21' 12'x18' 12'x24' 14'x20' 16'x32' 18'x33'
KTop Track (Curved Side)R2041030"12

KTop Track (Curved Side)R20328NOIR46-3/4"1010

KTop Track (Curved Side)R20336MOD43-3/4"

12


KTop Track (Curved Side)R20329NOIR48-5/8"

12
KTop Track (Curved Side)R20336NOIR44-1/2"

14
LTop Track (Straight Side)R2013132"84
LTop Track (Straight Side)R20131NOIR32"481212

Bottom Tracks – Reference G & J

Saltwater Titan Bottom Tracks

Bottom Track

The Bottom Track inserts into the Upright Boots on the curved sides of the oval swimming pool and sit on top of the Foot Beams on the Straight Sides.

Material: Resin

Ref #DescriptionPart # Length 10'x21' 12'x18' 12'x24' 14'x20' 16'x32' 18'x33'
GBottom Track (Curved Side)R2041030"12

GBottom Track (Curved Side)R2032846-3/4"1010

GBottom Track (Curved Side)R20336MOD43-3/4"

12


GBottom Track (Curved Side)R2032948-5/8"

12
JBottom Track (Curved Side)R2033644-1/2"

14
JBottom Track (Straight Side)R2013132"84841212

Top Caps – Reference F

Top Cover Cap for Saltwater Edge

Top Cap

The Top Caps go over the Top Joiner Plates. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.

Ref #DescriptionPart # 10'x21' 12'x18' 12'x24' 14'x20' 16'x32'18'x33'
F
Top Cap 7774GFRB201418
16
24
26

Cap Extension Collar – Reference M & P

Saltwater Edge Cap Extension Collar - Round & Oval Curved Side

Cap Extension Collar (Curved Side)

Saltwater Edge Cap Extension Collar - Oval Straight Side

Cap Extension Collar (Straight Side)

The Upright Collars are installed at the top of every upright on the outside of the swimming pool.

For the oval shaped Saltwater Titan swimming pools there are (2) types of Cap Extension Collars. There are Cap Extensions for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the cap must fit onto the upright.

Ref #DescriptionPart # 10'x21'12'x18'12'x24' 14'x20'16'x32' 18'x33'
M
Cap Extension Collar (Curved Side)7776GFR1088
10
10
12
PCap Extension Collar (Straight Side)7776GFBR106
10
61414

Top Connector Joiner Plate – Reference E

Buttress Top Connector Joiner Plate for Oval Straight Side of Saltwater Titan Pool Models

Top Connector Joiner Plate

The Top Connector Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Connectors Joiner Plates.

Ref #DescriptionPart # 10'x21' 12'x18'12'x24' 14'x20' 16'x32' 18'x33'
ETop Connector Joiner Plate568PRUM3201418
1624
26

Upright Post – Reference D & O

Upright Post for Round & Oval 54

Upight Post for Curved Side

Upight Post for Straight Side for Saltwater Edge

Upight Post for Straight Side

The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post on the curved side of the swimming pool clips into the Upright Boots.

For oval shaped swimming pools there are (2) types of Uprights. There are Uprights for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the Top Connector Joiner plate must fit onto the top of the upright.

Ref #DescriptionPart # 10'x21' 12'x18' 12'x24' 14'x20'16'x32' 18'x33'
DUpight Post for Curved Side7720GF54R41088
1010
12
OUpight Post for Straight Side 7005BLNGF54R4 106
1061414

Upright Boot Bottom Connector – Reference C

Upright Boot for Round & Oval Curved Side Saltwater Edge Pool Models

Upright Boot Bottom Connector

The Upright Boot Bottom Connectors connect your Bottom Tracks together on the curved sides of an oval swimming pool. Your curved side upright posts will also clip into the Upright Boot Bottom Connector.

Ref #DescriptionPart # 10'x21' 12'x18'12'x24' 14'x20' 16'x32' 18'x33'
CUpright Boot Bottom Connector7FCCOMBOGFRM1088
1010
12

Coping Strips – Reference DD

Coping For Overlap Liners - 2ft. Section

Coping Strips

Coping For Overlap Liners - 2ft. Section

Overlap Liner Installation Using Coping Strips

An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If you are using a Uni-Bead or J-Hook liner, you can discard the coping strips.

Splice Brackets – Reference T

Trevi Splice Bracket

Splice Bracket

The Splice Brackets are attached at each side of the straight side Upright Post.

Ref #DescriptionPart # 10'x21' 12'x18'12'x24' 14'x20' 16'x32' 18'x33'
TSplice Bracket9014GV201220
1228
28

Foot Beam – Reference S

Trevi Foot Beam

Foot Beam

The Foot Beams are installed on the straight sides of the oval and towards the inside of the pool area.

The Straight Side Upright Posts, Splice Brackets, Tension Straps and Pressure Plates will be installed to these Foot Beams.

Ref #DescriptionPart # 10'x21' 12'x18'12'x24' 14'x20' 16'x32' 18'x33'
SFoot Beam901310610
614
14

Pressure Plate – Reference N

Trevi Pressure Plate

Pressure Plate

The Pressure Plates are corrugated steel plates that attach to the Foot Beams.

Ref #DescriptionPart # 10'x21' 12'x18'12'x24' 14'x20' 16'x32' 18'x33'
NPressure Plate9019GVBTM848
412
12

Tension Straps – Reference Y

Trevi Tension Strap

Tension Strap

The Tension Straps are connected to the Foot Beams and lay flat across the width of our Oval Swimming Pools.

Ref #DescriptionPart # Length 10'x21' 12'x18' 12'x24' 14'x20' 16'x32' 18'x33'
YTension Strap900247-7/8"5



900337-15/16"
610
900441-1/4"


21
900549-15/16"

21
9006 50-1/8"
6

Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Saltwater Edge Oval Swimming Pool.

SALTWATER EDGE OVAL INSTALLATION & SAFETY INSTRUCTIONS

Saltwater Edge
Replacement Parts

Need a replacement part? Shop our selection of Saltwater Edge Pool Parts by clicking on the yellow "Shop Replacement Parts" button below:

Shop Replacement Parts
Boreal Replacement Parts