How To Identify Your
Saltwater Edge Round Pool Components
Learn how to identify the different components of your Saltwater Edge Round Pool.
Saltwater Edge Round Pool Model
Parts Breakdown
Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Saltwater Edge Round Swimming Pool Model.
Top Ledge – Reference A
Top Ledge
The Top Ledges (sometimes referred to as Top Rails) are the resin top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 7″ wide and are located at the very top of your pool.
Material: Resin
| Ref # | Description | Part # | Length | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|---|
| A | Top Ledge | 781006RGS | 45" | 10 | |||
| A | Top Ledge | 781005RGS | 47" | 12 | |||
| A | Top Ledge | 781014RGS | 55-1/4" | 12 | 14 |
| Ref # | Description | Part # | Length | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|
| A | Top Ledge | 781014RGS | 55-1/4" | 16 | 18 | 20 | 22 |
Top Tracks – Reference K
Top Track
The Top Track Stabilizers are the tracks/rails that stabilize the top of the pool wall.
Material: Resin
| Ref # | Description | Part # | Length | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|---|
| K | Top Track | R20336NOIR | 44-1/2" | 10 | 12 | ||
| K | Top Track | R2041533NOIR | 55-1/2" | 12 | 14 |
| Ref # | Description | Part # | Length | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|
| K | Top Track | R2041533NOIR | 55-1/2" | 16 | 18 | 20 | 22 |
Bottom Tracks – Reference G
Bottom Track
The Bottom Tracks insert into the Upright Boots.
Material: Coated Steel
| Ref # | Description | Part # | Length | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|---|
| G | Bottom Track | R20336 | 44-1/2" | 10 | 12 | ||
| G | Bottom Track | R2041533 | 55-1/2" | 12 | 14 |
| Ref # | Description | Part # | Length | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|
| G | Bottom Track | R2041533 | 55-1/2" | 16 | 18 | 20 | 22 |
Top Caps – Reference F
Top Cap
The Top Caps go over the Top Joiner Plates. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| F | Top Cap | 7774GFRB | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| F | Top Cap | 7774GFRB | 16 | 18 | 20 | 22 |
Cap Extension Collar – Reference M
Cap Extension Collar Curved Side
The Upright Collars are installed at the top of every upright on the outside of the swimming pool.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| M | Cap Extension Collar | 7776GFR | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| M | Cap Extension Collar | 7776GFR | 16 | 18 | 20 | 22 |
Top Connector Joiner Plate – Reference E
Top Connector Joiner Plate
The Top Connector Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Connectors Joiner Plates.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| E | Top Connector Joiner Plate | 568PRUM3 | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| E | Top Connector Joiner Plate | 568PRUM3 | 16 | 18 | 20 | 22 |
Upright Post – Reference D
Upight Post for Curved Side
The Upright Posts are the vertical posts on the outside of your swimming pool wall. Each upright post on the curved side of the swimming pool clips into the Upright Boots.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| D | Upight Post | 7720GF54R4 | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| D | Upight Post | 7720GF54R4 | 16 | 18 | 20 | 22 |
Upright Boot Bottom Connector – Reference C
Upright Boot Bottom Connector
The Upright Boot Bottom Connectors connect your Bottom Tracks together on the curved sides of an oval swimming pool. Your curved side upright posts will also clip into the Upright Boot Bottom Connector.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' |
|---|---|---|---|---|---|---|
| C | Upright Boot Bottom Connector | 7FCCOMBOGFRM | 10 | 12 | 12 | 14 |
| Ref # | Description | Part # | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|
| C | Upright Boot Bottom Connector | 7FCCOMBOGFRM | 16 | 18 | 20 | 22 |
Coping Strips – Reference DD
Coping Strips
Overlap Liner Installation Using Coping Strips
An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If using a Uni-Bead or J-Hook liner you can discard the coping strips.
Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Saltwater Edge Round Swimming Pool.
SALTWATER EDGE ROUND INSTALLATION & SAFETY INSTRUCTIONSSaltwater Edge
Replacement Parts
Need a replacement part? Shop our selection of Saltwater Edge Pool Parts by clicking on the yellow "Shop Replacement Parts" button below:
Shop Replacement Parts
