How To Identify
Your Signature RTL Round Pool Components

Learn how to identify the different components of your Signature RTL Round Pool.

How To Identify Your Signature RTL Round Pool Components
Signature RTL Round Pool Model

Signature RTL Round Pool Model

Parts Breakdown

Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Signature RTL Round Swimming Pool Model.

Signature RTL Round Parts Breakdown

Top Ledge – Reference #6

Signature RTL Top Ledge

Top Ledge

The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 7″ wide and are located at the very top of your pool.

Material: Resin

Ref #DescriptionPart # Length 12'
6Top Ledge 22769 40-1/8" 11
Ref #DescriptionPart # Length 15' 18' 21' 24' 27' 30'
6Top Ledge 22774 56-7/16" 1012
1416
18
20

Top Track/ Inner Stabilizer – Reference #1

Signature RTL Top Track

Top Track

The Top Track Stabilizers are the tracks/rails that stabilize the top of the pool wall.

Material: Aluminum

Ref #DescriptionPart # Length 12'
1Top Track (Inner Stabilizer) 10306 42-5/8" 11
Ref #DescriptionPart # Length 15' 18' 21' 24' 27' 30'
1Top Track (Inner Stabilizer) 38502 53-1/4" 11



10308 54-1/8"
13
12903 54-7/16"
15



10310 52-1/4"
18
20163 52-7/8"
20

1907051-1/4" 23

Top Covers – Reference #9 & #10

Top Cover/Outer Cap for Cameo, Heritage RTL, Signature RTL & Saltwater 5000 - Round & Oval Curved End

Top Cover/Outer Cap

Top Cover/Inner Cap for Cameo, Heritage RTL, Signature RTL & Saltwater 5000

Top Cover/Inner Cap

The Top Caps consist of (2) parts. There is a Top Cover/Outer Cap which is closer to the outside of the pool. The Top Cover/Inner Cap is installed on the inside of the swimming pool closer to the water. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.

Ref #DescriptionPart # 12' 15' 18' 21' 24' 27' 30'
9Top Cover/Inner Cap 22732 111012
1416
18
20
10Top Cover/Outer Cap 22734 1110
1214161820

Top Joiner Plate – Reference #3

Top Joiner Plate for Round & Oval Curved Side Cameo, Melenia, Heritage RTL & Signature RTL

Top Joiner Plate for Round & Oval Curved Side Uprights

The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.

Ref #DescriptionPart # 12' 15' 18' 21' 24' 27' 30'
3Top Joiner Plate 22761 111012
1416
18
20

Uprights – Reference #5

Curved Side Upright

Curved Side Upright

The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post inserts into the bottom upright boot and connects to the top joiner plate with screws.

Ref #DescriptionPart # 12' 15' 18' 21' 24' 27' 30'
5Upright 22760 111012
1416
18
20

Upright Boot – Reference #8

Upright Boot for Cameo, Heritage RTL, Signature RTL & Saltwater 5000 Pool Models

Upright Boot

The Upright Boots connect your Bottom Tracks together on a round pool and on the curved sides of an oval swimming pool. Your curved side uprights will also clip into the Upright boots.

Ref #DescriptionPart # 12' 15' 18' 21' 24' 27' 30'
8Upright Boot 22735 111012
1416
18
20

Coping Strips – Reference #7

Coping For Overlap Liners - 2ft. Section

Coping Strips

Coping For Overlap Liners - 2ft. Section

Overlap Liner Installation Using Coping Strips

An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If using a Uni-Bead or J-Hook liner you can discard the coping strips.

Ref #DescriptionPart # 12' 15' 18' 21' 24' 27' 30'
7Coping Strips 10296 91214
1619
21
24

Bottom Track – Reference #2

Signature RTL Bottom Track

Bottom Track

The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.

The Bottom Track inserts into the Upright Boots on the curved sides of the swimming pool and Straight Side Bottom Rail Connector on the straight sides.

Material: Aluminum

Ref #DescriptionPart # Length 12'
2Bottom Track 10289 38" 11
Ref #DescriptionPart # Length 15' 18' 21' 24' 27' 30'
2Bottom Track 22267 54-1/8" 10



14075 54-7/16"
12
14076 54-5/16"
14



14077 54-1/8"
16
14078 54-1/4"
18

2226854-1/4" 20

Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Signature RTL Round Swimming Pool.

SIGNATURE RTL ROUND INSTALLATION & SAFETY INSTRUCTIONS

Signature RTL Replacement Parts

Need a replacement part? Shop our selection of Signature RTL Pool Parts by clicking on the tab below:

Shop Products
Signature RTL Replacement Parts